MATERIAL SAFETY DATA SHEET
Conform
to 2001/58/EEC
Date/revised:
January 11, 2005
Product:
PVClear
1.
Product and Company Identification
1.1 Product
Identification:
PVClear PVC shrink film
1.2 Seller Identification:
Syfan USA Corp., 9900 Stirling Road, Cooper City, 33024 FL, USA
2.
Composition / Information on ingredients
Polyvinylchloride
CAS number: 9002-86-2
EINECS number: 208750-2
3.
Hazards Identification
Product classified as non
hazardous according to the Directive 1999/45/EEC.
None.
See paragraph 7.
4. First aid measures
4.1 Inhalation:
In case of accidental
inhalation of fumes caused by overheating or combustion, bring patient to fresh
air. In case of long exposure consult first aid.
4.2 Skin Contact :
In case of contact with
melted material, cool quickly the involved part with cool water, do not tear
away the film from the skin, consult first aid.
4.3 Eyes Contact:
In case of eyes contact
rinse with fresh water, consult first aid.
4.4 Ingestion:
In case of ingestion
consult first aid.
5.
Fire fighting measures
5.1
Prescriptions:
Do not store with
inflammable or explosive products, keep away from sources of heat, sparks and
free flames. Melted material will spread out in combustion reactions.
5.2
Suitable extinguishing media :
Carbon dioxide, dry
powder, water spry, foam.
5.3
Protective equipment:
Use eyes and skin
equipment.
6.
Accidental release measures
For re-use or material
elimination, collect rolls in order to avoid third parties injuries.
7. Handling
and storage
7.1
Handling:
No particular safety
measures if product is correctly handled.
7.2
Storage:
Store material in a
controlled temperature environment from 0°C to 25°C.
Do not store product in
extreme humidity conditions.
Use product within three
months from reception.
8
Exposure control /Personal protection
Safety work equipment is
recommended.
9
Physical and Chemical Properties
Physical state: thin film
in rolls.
Colour:
transparent
Odour:
none
Density:
1.3 g/cm3 (20°C)
Melting
range: 140°C¸180°C
Flash point: 400°C.
Water solubility: insoluble
pH: not applicable
Viscosity: not applicable
Vapour pressure: not
applicable
10
Stability and Reactivity
Stable at normal conditions.
11
Toxicological Information
None.
12
Ecological Information
If the material is properly used and disposed there are not
environmental pollution effects.
13
Disposal Considerations
Send to a controlled land-fill or incinerator.
Film does not contains heavy metals.
14
Transport Information
Material is not classified as dangerous according to transport
regulations.
15
Regulatory Information
According to EU Directive 94/62/EEC and EU Directive 99/45/EEC.
16
Additional Information
Do not expose product
outside temperature range of 0°C¸25°C, except during packaging
process.
All information provided
in this Material Safety Data Sheet is correct to the best of our knowledge at
the date of publication. The information given is designed only as a guide for
safe handling, use, processing, storage and transportation and is not to be
considered a warranty or quality specification. The information relates only to
the specific material designated.
Customers should examine
the suitability and completeness of such information for their own particular
use. The application, use and processing of these products and the products
manufactured by yourselves on the basis of our technical advice are beyond our
control, and therefore remain within your responsibility.
CLOSE WINDOW